Home > Products

Products

  • Road Milling Machine Tool-holders HT22

    Contact Now

    Road Milling Machine Tool-holders HT22

    Tool holder is an important spare part of road milling machine, it is made by high quality hardened and tempered steel with maching and forging process. HT22 is a new quick-change tool holder system.

  • 94mm Matrix Body PDC Drill Bit

    Contact Now

    94mm Matrix Body PDC Drill Bit

    94mm Matrix Body PDC Drill Bit is made by PDC cutter teeth and tungster carbide matrix body. PDC cutter is brazed to matrix body as the cutting teeth. tungsten carbide polycrstylline as the PDC bit gauge. They are widely used in coal mining, geological drilling, water well...

  • RP19 road milling teeth

    Contact Now

    RP19 road milling teeth

    RP19 road milling teeth are made of YG6C tungsten carbide tips and 42CrMo. It is wear-resistant and impact toughness and suitable for milling asphalt. RP19 bits apply for road milling machine size with 1000-1900mm.

  • Wear-resistant RP01 road milling teeth

    Contact Now

    Wear-resistant RP01 road milling teeth

    Wear-resistant RP01 road milling teeth are made of tungsten carbide tips and 42CrMo. It applies for asphalt stabilization. Carbide tips shape of RP01 bits is cylindrical, it applies for any kinds of road milling equipment.

  • RP18 Asphalt Road Milling Bits

    Contact Now

    RP18 Asphalt Road Milling Bits

    RP18 road milling bit is made of 42 CrMo and YG11C alloy steel. It is wear-resistance and high impact toughness. RP18 bit applies for small milling machine and it is suitable for cutting soft to medium hard asphalt road milling.

  • The Alloy Bit

    Contact Now

    The Alloy Bit

    Alloy bit is made by superior steel. It is wear-resistant and high impact toughness, because of good characteristics carbide bit is widely used in coal mining and ore mining.

  • 42CrMo Tool-holders for coal mining

    Contact Now

    42CrMo Tool-holders for coal mining

    Material:40CrMnMo(4140),42CrMnMo(4240)Specification:S100,S160,S200,U170, etc. In addition to common specifications, our products can be made according to your drawings or samples.

  • Carbide Chisel Bits

    Contact Now

    Carbide Chisel Bits

    1)Chisel bit is made of superior cemented carbide tips,high intensity and hardness.2)Bit body chooses high strengthen steel and processes by rigorous heat treatment, bit body have high strength.

  • Picks Cutter and Tool Header

    Contact Now

    Picks Cutter and Tool Header

    Material:40CrMnMo(4140) 42CrMnM(4240) Specification:U82,U84,U85,U92,U95.In addition to common specifications, our products can be made according to your drawings or samples.

  • Blast Hole Tricone Rock Bits

    Contact Now

    Blast Hole Tricone Rock Bits

    1,Blast hole tricone rock bits 2,Air-cooled and gas pressure deslagging bit 3,For coal, iron ore, and more.

  • DTH Hammer Bit

    Contact Now

    DTH Hammer Bit

    DTH bit adopt YK05 tungsten carbide as the buttons material, use advanced manufacture process to produce. It is a bit which is used with DTH hammer supporting, it works reply on spline and hammer supporting. Because of good performance it is widely used in geological drilling...

  • PDC Inserts with different shapes

    Contact Now

    PDC Inserts with different shapes

    This series PDC cutter has different shapes. it is a complex material which is made under high temperature and high pressure sintering. Combine the hardness, wear-resistance and thermal conductivity with high impact toughness and strength of tungsten carbide. It is an...

We're Here to Help

  • Xi'an Tydrillbits Co.,Ltd

    Web:www.tydrillbits.com

    Tel:0086 29 88894370

    Fax:0086 29 88292894-602

    Email:robert@tydrillbits.com

    Add:Num.11 Dianzi 3rd road Yanta district Xi'an China

Newsletter

Enter in your email address to receive deals
and coupons.
Bookmark us today!